Results 1 to 8 of 8

Thread: Need help with super hard openings

  1. Header
  2. Header-59

BLiNC Magazine, always served unfiltered
  1. #1
    BLiNC Magazine Founder mknutson's Avatar
    Join Date
    Jul 1994
    Location
    Perigee Pro, Flik DP
    Posts
    4,380
    Blog Entries
    21

    Need help with super hard openings

    I am having some issues with my Flik 260' with 4 vents and a 34" vented PC.
    I am having issues finding a small whole mesh slider right now, so I have a large whole and have been using direct control for the slider and have been rolling the heck out of the nose, but I am still getting really hard openings.

    I am looking for advise as to what I can do as this is way too hard. Someone suggested the slider-gate, and potentially in addition to the direct control. Can anyone give me some suggestions?

  2. #2

    Re: Need help with super hard openings

    Hi Mick

    I sometimes have this problem on terminal tracking jumps however I think it has more to do with body position than hard openings. If you open in full track then your body goes from a head low position to upright in a couple of seconds as well as decelerating massively. This can really hurt, especially if you're tall.

    I find that if I level of my track in the last couple of seconds the opening seems a lot less violent, even though my delay + packing method haven't changed.

  3. #3

    Re: Need help with super hard openings

    A 32" works just fine at terminal.

    Put a zingzuit on as you can flare it a bit to get softer openings.

    Use direct and indirect slider control.

    Roll the piss out of the nose.

    Fine mesh works just fine for sliders.

    If you go terminal then why aren't you wearing a zingzuit?

    Get a different tarp.

    Put a zingzuit on!
    Dr. Nick

    Nitro Rigging

  4. #4
    BLiNC Magazine Founder mknutson's Avatar
    Join Date
    Jul 1994
    Location
    Perigee Pro, Flik DP
    Posts
    4,380
    Blog Entries
    21

    Re: Need help with super hard openings

    Quote Originally Posted by nicknitro71 View Post
    A 32" works just fine at terminal.

    Put a zingzuit on as you can flare it a bit to get softer openings.

    Use direct and indirect slider control.

    Roll the piss out of the nose.

    Fine mesh works just fine for sliders.

    If you go terminal then why aren't you wearing a zingzuit?

    Get a different tarp.

    Put a zingzuit on!
    What is a ZingZuit?

  5. #5

    Re: Need help with super hard openings

    A zingzuit is an apparatus that allows you to look really cool. It also fixes for poor body positions but iff you wear a go pro otherwise it does not work as advertised.
    Dr. Nick

    Nitro Rigging

  6. #6
    BLiNC Magazine Founder mknutson's Avatar
    Join Date
    Jul 1994
    Location
    Perigee Pro, Flik DP
    Posts
    4,380
    Blog Entries
    21

    Re: Need help with super hard openings

    Quote Originally Posted by nicknitro71 View Post
    A zingzuit is an apparatus that allows you to look really cool. It also fixes for poor body positions but iff you wear a go pro otherwise it does not work as advertised.
    Are you taking a piss? Show me a picture.

  7. #7
    BLiNC Magazine Founder mknutson's Avatar
    Join Date
    Jul 1994
    Location
    Perigee Pro, Flik DP
    Posts
    4,380
    Blog Entries
    21

    Question Re: Need help with super hard openings

    I found a small whole mesh slider for a 245 but my canopy is a 260.

    Will this work?

    mesh-slider2.jpg

    I just need a solution for the next week in the Valley.

  8. #8

    Re: Need help with super hard openings

    In my limited experience, a tailgate seems to slow SU openings some.

Similar Threads

  1. How to understand and treat back injuries from hard openings...?
    By mknutson in forum The 'Original' BASE Board
    Replies: 10
    Last Post: July 12th, 2011, 05:17 PM
  2. Brisker openings
    By stitch in forum The 'Original' BASE Board
    Replies: 8
    Last Post: December 7th, 2006, 11:15 AM
  3. openings....
    By guest in forum The 'Original' BASE Board
    Replies: 0
    Last Post: January 11th, 2000, 10:42 AM
  4. 180 openings again!
    By guest in forum The 'Original' BASE Board
    Replies: 1
    Last Post: October 30th, 1999, 06:04 AM
  5. 180 openings
    By guest in forum The 'Original' BASE Board
    Replies: 1
    Last Post: October 22nd, 1999, 08:25 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •