1. Header
  2. Header-80

Welcome: If this is your first visit, start by reading the followingÂ…
Contribute
Feel free to leave comments at the bottom of a page, or become an Editors and change the actual contents.


ENTER the NEW BASE Wiki

Recent changes
If this is a return visit, click here to see what Editors have recently changed.

About the New BASE Wiki.

Elastics

This page is a chapter in 'BASE Wiki Other Gear'

Elastics: The lines in a BASE rig are almost always free-stowed rather than held in place using elastics, as in skydiving. Nevertheless, elastics are used in BASE for many purposes, including:
  • Closing the container
  • Holding the slider in direct control
  • Holding a bight of line in the tail-gate
  • Holding a bight of line in the tailpocket for indirect control
  • Stowing the [][/] Multi bridle attachment
  • Containing the bridle in a static-line jump.

Black and tan elastics (penny for scale)
Elastics used in BASE are generally of one of two types, shown in the photo to the right. On the right is a tan elastic — a small skydiving elastic cut in half lengthwise; on the left is shown a black elastic. Tan elastics are cheaper and easier to find, but break more easily. Black elastics are much more difficult to break, and therefore need to be replaced less frequently.

In the BASE world, where packing is often done in the field and elastics can be difficult to attach, replacing elastics can be even more of a pain than in the skydiving world. Black elastics are therefore popular for many applications. Unlike with a skydiving main, however, an elastic that fails to release on a BASE rig almost always leads to injury, and can be fatal.



Particularly in a sub terminal environment, where the tailgate is used (and the multi if the rig is equipped with one), applied forces may be insufficient to break a black elastic which becomes locked up. Black elastics should not be used for these applications.



BLiNC Magazine strongly encourages readers to comment on its content. Read the Disclaimer and the policy on Site Naming. Posting a comment releases it in the Public Domain. These comments will be moderated. If you see inappropriate content, please notify the administrator
All rights reserved. No republication of this material, in any form or medium, is permitted without express permission of the author. All images and words are protected by U.S. and International Copyright laws. Copyright 1994-2011

This page has been seen 8,002 times.

Current Discussion: Main discussion

  1. No comments have been posted for this discussion.

Users Browsing This Page (0 members, 1 guests)