1. Header
  2. Header-80

Welcome: If this is your first visit, start by reading the following…
Contribute
Feel free to leave comments at the bottom of a page, or become an Editors and change the actual contents.


ENTER the NEW BASE Wiki

Recent changes
If this is a return visit, click here to see what Editors have recently changed.

About the New BASE Wiki.

Line Release Mod

This page is a chapter in 'BASE Wiki Packing'

Line Release Modification: Todo; talk about different configs (Keeper and no grommet. Grommet and no keeper) and why they are dangerous. Talk about whether or not it’s a good idea on skydives (slider might not come down, or come down slowly).

The Line Release Mod has been developed when it became clear that lineovers were appearing more often on Slider Down jumps.

The idea is basically really simple : If you take the control line outside of the slider grommet and outside the keeper ring, you have the control line free from your hand to the trailing edge (once unpopped). In case of lineover, just release the toggle, and the control line will go away clearing up the malfunction.

Then, you have to land with your risers because once released, theres no way to recover the control line floating in the wind - so impossible to recover..

There's a discussion about the dangers of using the LRM (lines routed outside of the grommets) when jumpind SL-down VS the pro's of LRM (ability to deal with a lineovers)

There's been accidents where people lost a toggle after a normal openings because of the LRM and had to land a canopy with rear risers. Whatever the skill level, it's always easier and safer to land with both brakes!

Nowadays, given that

a) we now have some good models of LRT (line-release-toggles) on the market

b) with the tailgate and a proper packing, the likelihood of lineovers are near zero

then more and more people stop using the LRM on SL-down jumpe because they feel that it's overall safer (note that this might not apply to every jump).







BLiNC Magazine strongly encourages readers to comment on its content. Read the Disclaimer and the policy on Site Naming. Posting a comment releases it in the Public Domain. These comments will be moderated. If you see inappropriate content, please notify the administrator
All rights reserved. No republication of this material, in any form or medium, is permitted without express permission of the author. All images and words are protected by U.S. and International Copyright laws. Copyright 1994-2011

This page has been seen 17,685 times.

Current Discussion: Main discussion

  1. No comments have been posted for this discussion.

Users Browsing This Page (0 members, 1 guests)